How To Resurface A Storm Bowling Ball

Procedure for Proper Resurfacing. When you finish sanding the exposed area you will rotate your ball 180 degrees.

Storm Electrify Solid 3 Tone Red Bowling Ball Free Shipping Gebhardtsbowling Com

Using your fingers to move the pad up and down the side of your bowling ball as you sand puts you at risk for a serious injury if one of your fingers gets stuck in one of your balls holes.

How to resurface a storm bowling ball. Supplies Needed for Resurfacing. 4000-grit Abralon Sand lightly for 20 seconds on all four sides. Abralon Pads - 180 360 500 1000 2000 4000.

1000-grit Abralon Sand lightly for 20 seconds on all four sides. 500-grit Abralon - Sand for 30 seconds on all four sides with firm pressure. Heres what led to this.

2000-grit pad Sand lightly for 10 seconds on all four sides. Resurface to the original factory finish using a ball spinner. Keep the surface moist by spraying with water periodically throughout the resurfacing process.

Sand the ball starting with 180 grit Abralon. 500-grit Abralon Sand firmly for 30 seconds on all four sides. 500-grit Abralon pad -.

Here are the Five Steps recommended by Storm. It seems all the pros in my area including those Ive used in the past resurface and de-oil bowling balls by BAKING them. In this video I will be showing you how to resurface a bowling ball.

How you resurface a bowling ball depends on what type of results you want for your bowling ball. Another effective way to bring bowling balls back to life is to revive them but using a heated oil extraction machine like the Pyramid Phoenix Personal Ball Revivor. When you are resurfacing a ball you are sanding it down to recreate the hills and valleys of the microscopic pores that were clogged by oil.

By sanding with different grits you can change how your ball reacts to fit your individual style. I ordered a ball spinner abralon pads and the necessary polishes I need to completely resurface and polish where necessary all my bowling balls. Well yesterday I jumped off the deep end.

2000-grit Abralon - Sand for 20 seconds on all four sides with light pressure. Finally you will rotate the ball another 180 degrees and continue sanding to make sure you have filed all the covering material on the ball. Water use a spray bottle if spinner does not have water supply Storm Step 1 2 3 and Reacta Shine.

More sides than that doesnt add additional grit and should be reserved for resurfacing or using a ball spinner. Continuously moving the pad from the top to middle of the ball in an up and down motion. Every 60 Games Ball is Due For Full Resurface and New Inserts Tropical SurgeTM Pearl Available in 2 colors Available in 4 colors 2000-grit Abralon.

1000-grit Abralon - Sand for 20 seconds on all four sides with light pressure. 4000-grit Factory Finish 1. The ball I am resurfacing is 1500 Grit Polished-----.

1000-grit Factory Finish 1. FREQUENCY POLISHED BALL DULL BALLS Between Shots Wipe with Storm Shammy Wipe with Storm Shammy After Bowling Clean with Suggested Storm Cleaner Clean with Suggested Storm Cleaner. Two sides will cover the ball and apply the true grit when sanding by hand.

This machine allows you to heat your bowling ball to a safe temperature to pull the oil from. 1500-grit Polished Factory Finish. Place the ball in the spinner with the pin up.

500-grit pad Sand firmly for 30 seconds on all four sides. 2000-grit Abralon Sand lightly for 20 seconds on all four sides. Here are the steps to sand a bowling ball.

Resurfacing a bowling ball can be an easy process if you follow the correct process on a ball spinner. Use the listed process by hand to maintain your bowling ball surface and keep your performance at its peak. Use the palm of your hand only to hold the pad on your bowling ball.

Today we take a bowling ball that has been used quite. When you spend working on that area you will turn your ball 90 degrees.

Axiom Pearl